Answe
ring
S
yst
em O
perat
io
n
34
To check your code at any time, press
MENU
twice.
The code appears, and the system announces it.
7UKPI
"
VJG
"
6QNN
/
5CXGT
If the ring time is set to
jI
jI
jI
jI
(toll-saver) (see “Setting
the Number of Rings” on Page 27), the system
answers after two rings if you have new messages
(ones you have not listened to).
If there are no new messages, the system answers
after four rings, so you can hang up before the
system answers and avoid unnecessary long-
distance charges.
If the message memory is full, the system answers
after about ten rings, regardless of the ring time
setting.
7
5+0)
"
4
'/16'
"
%
1//#0&5
While in remote operation, the system stops all
answering functions and displays
Bh
BhBh
Bh
. Answering
functions resume when it is no longer being
operated remotely, if you have not turned the
system off.
Remote operation stops when someone picks up
the handset or any phone on the same phone line.
1. Dial your phone number and wait for the
system to answer. If the system is not set to
answer calls, it will answer after about ten rings
and sound a series of beeps.
2. When the outgoing message begins (or the
system sounds a series of beeps), press
####
,
then enter your security code within 2 seconds.
3.
If the code is correct
, the system announces
the number of new and old messages, then “To
play incoming message, press
####
2
. For help,
press
####
0
.”
