Caller
ID
40
Long Distance calls and Area Code
Setting/Cancellation
While the present Caller ID information is
displayed, pressing
/tone/<
will place or
remove the prefix “1” in the display to set the
call for a long distance call, or pressing
#/>
will
set or cancel an area code (see “Setting the
Area Code” on page 21).
Ô
Storing Caller ID messages in the
Phonebook
Messages shown in the Caller ID list can be
stored in the phonebook. The phone
number and name of the party on the Caller
ID list can be stored in memory.
Ô
1. When the phone is in standby mode,
view the Caller ID message to be stored.
Then press
SELECT/
.
Store/Edit
Name
appears.
2. To complete the setting, follow the
steps 3-8 in “Storing Phone Numbers,
Names, Distinctive Rings, and Speed
Dial” on page 30-31.
C
ALL
W
AITING
D
ELUXE
F
EATURES
Your phone gives you new options for call
waiting. At the touch of a button, you can
place the caller on hold, send them to your
voice mail service, or conference them into
your current call. You may be required to
subscribe to Call Waiting and Call Waiting
Deluxe to use these features. Not all features
are available in all areas. Check with your
local telephone company for details.
Ô
1. When you receive a Call Waiting call,
press
MENU/DEL
for a list of options.
2. Press
VOL/RING/
or
VOL/RING/
to
select
CW Deluxe
and then press
SELECT/
.
Ô
NOTES
Ô
Using the Caller ID
Message
•
When a long distance
call has been set,
1
appears in the display.
•
If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
•
If the Caller ID message
was received as a
private/unknown
number, or the message
does not have the
number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored
as <No Name>.
•
Even if the 100 memory
locations are full, the
message will be stored
in the Phonebook.
However, the message
will be erased from the
Caller ID list.
Call Waiting Deluxe
Features
•
To activate features,
select
CW On/CWDX
On
in the CIDCW option.
See “Setting CIDCW
(Caller ID on Call
Waiting)” on page 20.
•
You can also answer a
waiting call immediately by
pressing
TALK/FLASH
,
the first caller will be
placed on hold. To return
to the original caller, press
TALK/FLASH
again.
•
If you don’t press a key
within 30 seconds while
in the operation, the
phone goes back to the
original call.
