background image

T

ro

ubl

es

hoot

in

g

11

TROUBLESHOOTING

If you still have problems, disconnect the phone. If other 
phones on the same line work properly, the fault is in this 
phone or its installation. If you cannot find the problem, take 
the phone to your local RadioShack store for assistance.

Problem 

Suggestions

Low volume or 
unusual sounds.

Someone has picked up another phone on the 
same line. Hang up the other phone.

If you are using the headset, make sure the 
headset’s plug is properly connected to the jack.

Severe noise 
interference.

Keep the handset away from microwave ovens, 
computers, remote control toys, wireless 
microphones, alarm systems, intercoms, room 
monitors, fluorescent lights, and electrical 
appliances.

Move the base to another location or turn off the 
source of interference. 

Press 

CH

 to change the channel. 

Hang up and redial the number.

The phone does 
not work properly.

Be sure the base’s phone line cord and AC 
adapter are correctly and securely connected.

Be sure the battery pack in the handset is 
connected and charged.

Return the handset to the base to change the 
digital security code.

The handset 
battery pack does 
not charge.

Check the charging contacts on the handset. If 
they are dirty, clean them with a damp cloth. 

Be sure the battery pack is connected correctly.

Be sure the handset is properly seated on the 
base. 

The handset stops 
working or works 
poorly during a 
call.

Move the handset closer to the base. 

Be sure the handset’s battery pack is charged.

The handset’s 
range has 
decreased and the 
phone cannot be 
operated at a 
useful distance 
from the base 
because the 
signal becomes 
weak or noisy.

Be sure the handset’s antenna is not touching a 
metal surface. 

The handset does 
not ring or receive 
a page.

Move the handset closer to the base. 

Return the handset to the base to recharge the 
battery pack.

Move the base away from other electrical 
devices.

43-3556.fm  11 ページ  2004年1月28日 水曜日 午前10時52分

Summary of Contents for 43-3556













Reviews: