9
Preparation
On a Desk, Shelf, or Table
1. Plug one end of the supplied long modu-
lar cord into the
TEL LINE
jack on the
back of the base.
2. Insert the supplied AC adapter’s barrel
plug into the
DC IN 9V
jack on the back of
the base.
3. Route the adapter’s cord through the
strain relief slot on the base.
4. Plug the modular cord’s other end into a
telephone wall jack.
5. Plug the adapter into a standard AC out-
let.
6. Lift the base’s antenna to a vertical posi-
tion.
7. Place the handset faceup or facedown
on the base.
On a Wall Plate
1. Plug one end of the supplied short mod-
ular cord into the
TEL LINE
jack on the
back of the base.
2. Insert the supplied AC adapter’s barrel
plug into
DC IN 9V
on the back of the
base.
3. Route the adapter and modular cords
through the strain relief grooves on the
base.
4. Plug the modular cord’s other end into
the wall plate jack.
5. Align the base’s keyhole slots with the
wall plate studs and slide the base
downward to secure it.
6. Plug the adapter into a standard AC out-
let.
7. Lift the base’s antenna to a vertical posi-
tion.
8. Place the handset faceup or facedown
on the base.
On a Wall
To mount the phone directly on a wall, you
need two screws (not supplied) with heads
that fit into the keyhole slots on the bottom of
the base.
1. Drill two holes 3
15
/
16
inches (100 mm)
apart. Then thread a screw into each
hole, letting the heads extend about
1
/
8
inch (3 mm) from the wall.
2. Plug one end of the supplied long modu-
lar cord into the
TEL LINE
jack on the
back of the base.
3. Insert the supplied AC adapter’s barrel
plug into
DC IN 9V
on the back of the
base.
4. Route the adapter cable and modular
cords through the grooves on the base.
Summary of Contents for 43-3514
Page 23: ...23 Notes Notes...
