16
Telephone Oper
ation
1
Telephone Oper
ation
few seconds.
MUTE
appears at the bottom of the
screen until the mute function is turned off.
2.
Press
MUTE/REMOVE
again to resume the
conversation. The handset screen temporarily
shows
MICROPHONE ON
.
Ringer Mute
When the telephone is ringing, press
OFF/CLEAR
or
MUTE/REMOVE
to temporarily silence the ringer
without disconnecting the call. The next call rings
normally.
Call Waiting
If you subscribe to call waiting service from your telephone company, you
hear an alert tone if there is an incoming call while you are on another call.
Press
/FLASH
to answer the new incoming call. Press
/FLASH
again
to return to the original call.
Find Handset
Use this feature to page all system handsets.
Press
FIND HANDSET
on the telephone base.
All idle handsets ring and the screens show
**
PAGING
**.
To end paging, press
/FLASH
,
, any
dialing keys (
0-9, #, *
), or press
FIND HANDSET
on the telephone base.
Chain Dialing
Use this feature while already dialing one phone number or while on a call
to initiate a dialing sequence from numbers stored in the directory, stored in
the call log, or from the most recent redial phone number. Chain dialing can
be useful when accessing numbers other than phone numbers (such as bank
account information or access codes).
To access a number in the directory while on a call:
1.
Press
MENU/SELECT
twice to select >
DIRECTORY
.
2.
Scroll to the desired entry by pressing
or
.
3.
Press
MENU/SELECT
to dial the displayed number.
PHONE 0:00:00
MUTED
MUTE
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE
RINGER MUTE
To access a number in the call log while on a call:
1.
Press
MENU/SELECT
and then press
or
to highlight
>
CALL LOG
.
2.
Press
MENU/SELECT
to select.
3.
Scroll to the desired entry by pressing
or
.
4.
Press
MENU/SELECT
to dial the displayed number.
To access the last number on the redial list while on a call:
Press
REDIAL/PAUSE
to dial. Press
REDIAL/PAUSE
again within two
seconds to cancel the chain dialing.
Multiple Handset Use
You can use up to two system handsets at a time on an outside call. If
a handset is already on a call and you would like to join the call, press
/FLASH
or
on another handset to join the call.
To end the call, press
OFF/CLEAR
or place the handset in the telephone
base or charger. The call will not be terminated until all handsets hang up.
You can buy additional expansion handsets for this telephone base from
your local
RadioShack
store or at www.RadioShack.com. You can register up
to 12 handsets to the telephone base.
The first nine handsets that you register are named
HANDSETS 1-9
. Use
the handset number to intercom and transfer calls. Although the names
for handsets
10-12
appear in their displays as
10-12
, when you intercom or
transfer to one of them, you must use
*0
for
HANDSET 10
,
*1
for
HANDSET
11
, and
*2
for
HANDSET 12
.
Intercom
You can have a conversation between two system handsets, so you can call
someone in another room of your home.
1.
Press
INT
on your handset when not in use.
• If you have a two-handset system, your handset
screen shows
CALLING OTHER HANDSET
.
• If you have more than two handsets, your screen
shows
INTERCOM TO:
. Use the dialing keys to
select the other handset. Your screen shows
CALLING HANDSET X
.
The other handset rings and its screen shows either
OTHER HANDSET IS CALLING
or
HANDSET X IS
CALLING
.
CALLING
OTHER HANDSET
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
OTHER HANDSET
IS CALLING