Beyond.the.Basics
To scroll between the prerecorded message and your own
personal greeting, press
greeting
when the outgoing message is
played. If you want to use your own greeting, or want to change
your greeting, refer to “Recording a personal outgoing message
(Greeting)” on page 44.
Setting.the.Message.Alert.Tone
Message Alert feature lets you know you have new messages by
sounding a short beeping tone. When the system receives a new
message while the Message Alert is on, the alert tone sounds
every 15 seconds.
1. Press
menu/clock
five times in standby mode.
You hear “Message alert” and the current setting ([ ] Off or
[ ] On), and it is displayed on the base. Then you hear the
guidance for setting the message alert tone.
2. Press
volume/select/
or
volume/select/
to select [ ]
or [ ].
3. Press
set
to select the new setting. you hear a confirmation
tone. Then the announcement “Message Alert” and the
current setting you have selected is announced. After a few
seconds, the system announces “To set language, press
menu again”.
Turning the Message Alert tone off
When all new messages are played back, the Message Alert
tone will automatically deactivate.
OR
If you want to silence the alert before you finish listening to all
the new messages,
press any key
on the base unit and the tone
will automatically deactivate.
•
•
UC050ZH_43-164_OM3.indd 42
1/9/2007 3:45:56 PM
