13
Operation
The echo is applied to the sound before all
the inputs are mixed.
Set
ECHO
to
MIC
to turn on the echo effect
for the microphones and the
AUX LINE
input.
Set
ECHO
to
MUSIC
to turn on the echo effect
for Channels 1, 2, 3, and 4 outputs.
To turn off the echo effect, set
ECHO
to
OFF
.
Adjusting the Echo Delay, Repeat,
and Volume
The
ECHO DELAY
control lets you adjust the
time delay for an echo. Set
ECHO DELAY
to
0
for a minimum time delay and to
10
for a
maximum time delay.
The
ECHO REPEAT
control lets you control
the length of time a tone is repeated (rever-
beration). Set
ECHO REPEAT
to
10
for the
longest time repeat and to
0
for the shortest.
The
ECHO LEVEL
control lets you adjust the
output level of the echo effect. Rotate
ECHO
LEVEL
toward
10
to increase the echo level
and toward
0
to decrease it.
USING SOUND EFFECT
DEVICES
Playing the Signal from the Sound
Effect Device
To play signals from a device connected to
the
EFFECT
jacks, set the
RECEIVE
switch to
ON
. When you are not using the connected
inputs, set the
RECEIVE
switch to
OFF
.
Rotate
RECEIVE
to adjust the volume of the
input connected to the
EFFECT
jacks without
changing the sound effect device's volume.
Rotate
RECEIVE
toward
10
to increase the
volume and toward
0
to decrease it.
Playing Input Signals through the
Sound Effect Device
You can play inputs selected by the channel
selectors,
DJ MIC
, or
AUX
through other
sound effect devices connected to the mixer,
such as an echo reverb or a digital sampler
processor, and control playback through the
mixer. To play selected inputs through the
sound effect device, set
SEND ASSIGN
to the
selected input.
The
SEND
control lets you adjust the volume
of the selected sound to the sound effect de-
vice without changing the device's volume.
Rotate
SEND
toward
10
to increase the vol-
ume and toward
0
to decrease it.
32-3008.fm Page 13 Thursday, April 6, 2000 4:03 PM
