19
Connect the red lead to the
V•W•
•mA•mA•
terminal
and the black lead to the
COM
terminal. All connections
except 20 A measurements are made at these terminals.
Caution: When
OL.
(overload) appears on the display,
the value you are measuring exceeds the meter’s maxi-
mum range. This is a normal display when you measure
resistance and do not have the leads connected to a
component. If you are measuring voltage or current, im-
mediately disconnect the probes from the circuit.
AUTOMATIC POWER OFF
Your meter conserves power by sounding a warning tone
and automatically turning off about 10 minutes after the
last time you changed settings (even if you are making
measurements). To turn the meter back on, press
RANGE
or
DATA-H
.
(illustration)
22-178.fm Page 19 Friday, August 6, 1999 11:38 AM