Radio Shack 2000629, User Manual

Page: 5 / 12

8
O
pe
ra
ti
on
9
O
pe
ra
tio
n
Selecting and Tuning a Waveband
You can choose from four wavebands: FM, AM, SW, LW.
Waveband Frequency coverage Antenna
FM 87.5 – 108 MHZ Fully extend the telescopic antenna; angle
and rotate for best reception.
AM 520 – 1710 kHz Internal
SW (short wave) 1711 – 29999 kHz Fully extend the telescopic antenna; angle
and rotate for best reception.
LW (long wave) 153 – 279 kHz Internal
Shortwave Meter Band
1. Turn on the radio.
2. Press BAND to select SW waveband.
3. Press SW SELECT button to select the required SW meter band. The radio displays the
SW frequency.
n
Note: This radio covers SW 120 to 11 meter bands.
Direct Tuning
1. Turn on the radio.
2.
Press BAND to select a waveband.
3. Press ; the radio displays ---- .
4.
Enter the station number, then press to confirm.
n
Note: Make sure you enter the correct number, otherwise the radio will switch to another
waveband.
5. Extend the antenna fully and rotate for best reception.
Manual Tuning
1. Press
BAND
to select a waveband.
2. Press / or turn the tuning knob to tune to the desired frequency.
Press the tuning knob to fine tune.
Press any other button to exit fine tuning.
Band FM AM LW SW
Tune 100/200 kHz 9/10 kHz 9 kHz 5 kHz
Fine Tune 50 kHz 1 kHz 1 kHz 1 kHz