![background image](http://html1.mh-extra.com/html/radio-shack/20-405/20-405_user-manual_3509833026.webp)
2
Adv
anced Oper
ation
Programming with a Personal Computer
You can upload or download programmed data to or from a PC using a USB
cable available from your local
RadioShack
store or www.RadioShack.com.
The application software is available online. Use a search engine to find
“scanner programming software.” Follow instructions in the software package
to upload and download data.
Initializing the Scanner
If the scanner’s display locks up or does not work properly after you connect a
power source, you might need to initialize the scanner.
n
Important:
This procedure clears all information you stored in the scanner’s
memory. Only initialize the scanner when you are sure the scanner is not
working properly.
1.
Turn off the scanner, then turn it on again.
WELCOME SCAnnInG rECEIVEr
appears.
2.
Press
0,
then press
1
while the welcome message is on the screen.
InItIAL
appears for about two seconds, then
YES
—
Ent
and
No
—
CLEAr
appear
alternately.
.
Press
ENT
.
WAIt
appears for about two seconds.
n
Note:
Do not turn off the scanner until the initialization is complete. When
the initialization is complete,
1CH 000.000
0
appears on the display.
Preprogrammed Frequencies
Your scanner has 153 preprogrammed frequencies in the ROM. You can load
them into Channels 1 to 153.
1.
Turn off the scanner and then turn it on again.
2.
While
WELCOME
message appears, press
PGM.
.
Load
–
Fr
– appears, then
YES
––
Ent
and
No
––
CLEAr
appear alternately.
4.
Press
ENT
to load frequencies or press
CLEAR
to cancel.