![background image](http://html1.mh-extra.com/html/radio-shack/20-405/20-405_user-manual_3509833025.webp)
25
Adv
anced Oper
ation
Using Priority
The priority feature sets the scanner to check one channel every two seconds
while scanning. You can program one frequency into the priority channel.
1.
Press
PGM,
then press
PRI/ALERT.
PCH
and
000.000
0
(or the previously
stored frequency) appear.
2.
Enter the frequency you want stored in the priority channel, then press
ENT
.
.
To turn on the priority feature, press
PRI/ALERT
during scanning or
searching.
PRI
appears. The scanner checks the priority channel every two
seconds and stays on the channel if there is activity.
• To turn off the priority feature, press
PRI/ALERT.
PRI
disappears.
• To program a weather channel as the priority channel, see
“Receiving All
Weather Alerts“
on page 21.
Turning the Key Tone On and Off
The scanner is preset to sound a tone each time you press one of its keys.
To turn the key tone on and off:
1.
If the scanner is on, turn it off then back on again.
2.
WELCOME SCAnnInG rECEIVEr
appears.
.
While the welcome message is on the screen, press
1
to turn on the key
tone or press
2
to turn it off.
Advanced Operation
Cloning the Programmed Data
You can transfer the programmed data to and from a PRO-405 scanner using
an optional connecting cable with
Ç
-inch (3.5mm) stereo phone plugs on both
ends (available from your local
RadioShack
store or www.RadioShack.com).
1.
Turn on both scanners.
2.
Connect the connecting cable to each scanner’s
PC/IF
jack.
CLOnE
and
UP
to SEnd
appears.
.
Press
e
on the host scanner.
4.
SEndInG
appears at the host scanner.
To exit clone mode after the data transfer is complete, remove the cable.
No ConnEct
appears if you try to connect to another model scanner. The PRO-
405 does not clone with other scanner models.