8
any key will exit and return to the normal working channel.
Reset
To reset the unit, press and hold the QUIET key and turn on the unit. Reset operation will
clean all the set channels and restore the current channel to CH2 with QUIET off. Power is
toggled to low mode, key tone and C-tone function are activated.
6. Push-To-Talk button / Keylock /C-Tone
To talk, hold down the
Push-To-Talk
. Speak into the microphone in a normal tone of voice
when the
TX
icon is displayed. When you finish speaking, release the
Push-To-Talk
button.
Your can also lock your radio setting to avoid accidental pressing of keys by activating the
keypad lock. Press and hold the
FUNC
button, then press the
PTT
button to activate or
deactivate the keypad lock.
Press and hold the
Push-To-Talk
while turning on the radio will enable or disable the
courtesy tone (C-Tone) function.
7. MON/FUNC Button
To hear everything happening on a channel, including weak transmission, hold down
MON/FUNC
button for more than 1.5 sec. Re lease the
MON/FUNC
button to turn the
auto-squelch back on.
8. External Mic/Spk Jack
Connect an optional speaker/microphone or earphone in this jack.
9. Charger Jack
You can recharge battery pack using the supplied battery charger. Plug the charger’s
barrel plug into the CHRG jack on the side of the unit, then connect the charger to a
standard AC outlet.
10. Rechargeable Battery Pack
You can recharge the battery pack using supplied the battery charger.
11. Belt Clip
To attach the belt clip, place it over the locking pin and align the screw hole. Tighten the
screw.
12. Antenna
Provides excellent reception.
