2
Your RadioShack 17-6025 Desktop
Charger is specially designed for use
with the 4-Watt Wireless Paging System
(Cat. No. 17-6023) and Tone/Vibration
Paging Receiver (Cat. No. 17-6024).
You can charge rechargeable batteries
(sold separately) without removing them
from the receiver by placing the receiver
in one of the charger’s slots. The batter-
ies recharge fully in about 14 hours.
Your charger includes these features:
Ni-Cd/Ni-MH Battery Charging Switch
— lets you charge either Ni-Cd or Ni-MH
batteries.
6 Charging Slots — let you charge up
to six receivers at the same time.
Automatic Charging — detects the
pager and automatically begins charging
when you place the pager in the slot.
Overnight Charging Timer — automat-
ically stops charging after 14–16 hours.
Charging Indicator — lights red while
charging is in progress and green when
charging is complete.
CONNECTING POWER
Plug one end of the power cord into the
9V DC
jack on the back of the charger.
Plug the power adapter into a standard
AC outlet.
SELECTING THE
BATTERY TYPE
Before charging batteries, you must se-
lect the type of battery to be charged.
Slide the
Ni-Cd/Ni-MH
switch on the
charger to
Ni-Cd
for nickel-cadmium bat-
teries, or
Ni-MH
for nickel-metal hydride
batteries.
Note:
• Do not mix different types of batter-
ies or rechargeable batteries of dif-
ferent capacities in the charger.
• Do not charge Ni-Cd batteries with
Ni-Cd/Ni-MH
set to
Ni-MH
. Doing so
could damage the batteries and the
pager.
©
1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
17-6025.fm Page 2 Friday, August 6, 1999 9:25 AM
