9
Preparation
DEVICE TYPES
You can use the remote control’s device keys to con-
trol the following types of devices:
TV
— TV
VCR
— VCR or PVR (Personal Video Recorder)
CBL/SAT
— Cable converter or SAT/DSS receiver
DVD
— DVD or LD Player
AUX
— Amplifier, tuner or other audio device
CD
– CD Player
SETTING UP YOUR REMOTE
To control devices other than the default brands (for
example, an RCA TV, VCR, and cable converter or
SAT/DSS receiver, a Pioneer DVD player, CD player,
and auxiliary device), perform the following steps. If
you use the default brand devices, skip this section.
1. Refer to “Manufacturers’ Codes” on Page 25 and
write down the code(s) for the brand of each
device you want to program on the supplied label.
Note: Some manufacturers may have several
codes listed. Try each until you find the right one.
If you cannot find the correct code, see “Using
Manual Code Search” on Page 23.
2. Turn on all your home entertainment devices.
3. On the remote control, press the desired device
key (
TV
,
VCR
,
CBL/SAT
,
DVD
,
CD
or
AUX
).
Note: For TV/VCR combinations, press
VCR
and
use the VCR code listed for your model under
“Television-VCR Combo Codes” on Page 45. If
your TV/VCR combination also lists a TV code,
you must program the TV separately by repeating
Steps 3–5 to add volume control. In Step 3, press
TV
, then in step 4 enter the TV code.
