background image

 
PLL Synthesized Weather Radio 
(120-0243)               Care and Maintenance         Faxback Doc. # 18941 
 
Your Realistic Weatheradio is an example of superior design and 
craftsmanship.  The following suggestions will help you care for the radio 
so you can enjoy it for years. 
 
    Keep the radio dry.  If it gets wet, wipe it dry immediately.  Some  
    liquids might contain minerals that can corrode the electronic 
    circuits.  
 
    Use and store the radio only in normal temperature environments.  
    Temperature extremes can shorten the life of electronic circuits,  
    damage batteries, and distort or melt plastic parts.  
 
    Handle the radio gently and carefully.  Dropping it can damage circuit  
    boards and can cause the radio to work improperly.  
  
    Keep the radio away from dust and dirt, which can cause premature wear  
    of parts.  
 
    Wipe the radio with a damp cloth occasionally to keep it looking new.  
    Do not use harsh chemicals.  Cleaning solvents, or strong detergents  
    to clean the radio.  
 
    Use only a fresh battery of the required size and type.  Always remove  
    an old or weak battery.  It can leak chemicals that destroy electronic  
    circuits.  
 
Modifying or tampering with the radio's internal components can cause a  
malfunction and might invalidate the radio's warranty and void your FCC  
authorization to operate the radio.  If your radio is not operating as it  
should, take it to your local Radio Shack store for assistance.  
 
 

Summary of Contents for 120-0243






Reviews: