This Operation Manual is intended for studying of structure and operating principle of
the digital Insulation resistance tester / megohmmeter Е6-32 (hereinafter referred to as
instrument) and contains the data relevant for proper operation, safety precautions and
calibration.
Operation conditions of instrument are as follows:
- temperature range from 15 to plus 50 ºС ;
- upper limit of relative humidity is 90 % at temperature of plus 30 ºС;
Standard conditions :
- ambient air temperature of plus 15 to plus 25 ºС;
- relative air humidity of 30 to 80%;
- atmospheric pressure of 84 to 106 kPa (630 to 795 mm Hg);
Protection grade of the casing IP54 in accordance with IEC 60529
Electrical safety as per IEC 61010-1, IEC 61010-2-30:2010.
The instrument satisfy the EMC compatibility requirements complies with
EMC directives complies with IEC 61326-1:2012
.
Due to permanent upgrade of instruments, the items produced and the design
described in this Operation Manual may differ to some extent.
Attention! Please read this Operation Manual before switching the megohmmeter on.
Attention! At measurement sockets of megohmmeter the dangerous voltage
up to 3 kV is generated.
This device is protected by a double insulation or by a reinforced insulation.
CAT III 1000V CAT IV 600V
Measurement category
AC voltage at sockets "+" and "-" shall not exceed 770 V.
2
