HD6-600 Mobile DVR
Page 44 of 67
Radio Engineering Industries, Inc.
640611 – 8/17/22
Motion Setup menu controls the video motion detection system of the DVR. The user can
enable camera motion detection individually. The system can be set to trigger a motion
detection alarm. Sensitivity and area settings are adjustable for each camera.
Five options to customize each channel separately are available. The options are Motion
Detect, Motion Alarm, Sensitivity, Min Area, and Trigger. Click Clear to start over.
Motion Detect: Enable motion detection for the selected channel.
Motion Alarm: Trigger alarm upon motion detection for the selected
channel.
Sensitivity: Motion detection sensitivity within each square. Ranges
between 1-LO and 5-HI.
Min Area: Minimum number of squares with motion required to trigger
motion detection. Select 1, 2, 4, 8, 16, 32, or 64.
Trigger: Input that must be active to enable motion detection (INPUT 1-8,
NONE equals always enabled).
Clear: Click to clear detection area.
Copy To: Copy the current settings to other cameras. The ranges are
individual cameras 1 through 6, All, 1-6, or 5-6.
Figure 40: Motion Setup - Set Grid
Click and drag on the Set Grid screen to select the squares within the detection area.
