Digital BUS-WATCH
®
19
Radio Engineering Industries, Inc.
640333
Rev 0 -- 1/1/2006
Mount Conversion
Digital BUS-WATCH®
IV
Cabinet Modification
(See Figure 11)
Reverse the placement of the slide rails with screws and washers from top to
bottom of the Digital BUS-WATCH®
IV
.
DVR Cabinet Modification
Figure 11
Digital BUS-WATCH®
IV
Floor Mount Installation
Find a suitable location to mount the slide bracket on the floor. The Digital BUS-
WATCH®
IV
should not present a trip hazard or head impact hazard and should
not interfere with the seating, safety, or comfort of the passengers.
1. An area 15 and 1/2 inches should be unobstructed in front of the slide bracket
to allow sliding the Digital BUS-WATCH®
IV
onto the bracket.
2. Position the slide bracket on the floor and drill four 3/16th inch holes into the
floor using the mounting holes as a guide.
3. Set aside the slide bracket. Position four rubber shock mounts over the pilot
holes.
4. Place the slide bracket over the rubber shock mounts. Align the mounting holes
to the center of the shock mounts.
5. Secure slide bracket to the floor using four lag bolts.
6. Carefully slide the cabinet onto the slide bracket being sure to check alignment
of the connector. Lock to secure.
