Digital BUS-WATCH
®
HDx00
Page 19 of 93
Radio Engineering Industries, Inc.
640430 -- Rev A -- 9/7/2012
Initial Set Up
The Digital BUS-WATCH® system will operate prior to any user setup with the
default settings. However, it may not show the correct time and date (factory set to
Central Standard Time). To set the correct date and time, and program the system
operation to your requirements, please refer to the
Menu Configuration
section of this
manual.
When accessing the menu, it is necessary to connect a video monitor to the video
jack on the front or back of the unit. REI recommends our battery-powered 7-inch Color
LCD monitor, P/N 690554.
Removable HDD and SD Card
DVR Loading and Unloading
Inserting HDD:
Turn the HDD key to the unlocked and off position. Slide the HDD
into the DVR and press firmly to make sure it is all the way in. Turn the HDD key to
the locked and on position, as shown in Figure 9 on Page 20.
Removing HDD:
Turn the HDD key to the unlocked and off position. Grab the handle
on the HDD and carefully pull it out.
Note:
The Digital BUS-WATCH
®
HDx00 series DVR will function no matter there is
an HDD or not. Without HDD, DVR will power on and allow user to configure the
settings but it will not record any videos unless the user load the HDD and lock the
HDD key.
