manualshive.com logo in svg

RADIKAL TECHNOLOGIES SAC-2K, Manual

Share
Download
RADIKAL TECHNOLOGIES SAC-2K Manual Download Page 2

SAC-2K manual

2

Radio and Television Interference

The equipment described in this manual generates and uses radio-frequency energy. If it is not
installed and used properly - that is, in strict accordance with our instructions - it may cause
interference with radio and television reception.

This equipment has been tested and complies with the limits  for a Class B computing device
in accordance with the specifications in Subpart J of Part 15 of the FCC rules. These rules are
designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that the interference will not occur in a particular installation,
especially if a „rabbit ear“ TV antenna is used.

If the SAC-2K does cause interference to radio or television reception, you can try to
correct the interference by using one or more of the following measures:

-

Turn the television or radio antenna until the interference stops.

-

Move the SAC-2K to one side or the other of the television or radio.

-

Move the SAC-2K farther away from the television or radio

-

Plug the SAC-2K AC Adaptor into an outlet on a different circuit than the television
or radio.

-

Consider installing a rooftop antenna with a coaxial lead-in between the antenna
and television set.

This product complies with the requirements of European Directive
DIN EN55022 (Emissions) and
DIN EN50082-1 (Interference Resistance)

Summary of Contents for SAC-2K





































Reviews:

No comments

Brands by name

Popular brands

Load more brands