SAC-2K manual
18
The „Mixer-Mode Parameter“
Pan
Ins./Send
High
Send 1
HiMid
Send 2
LowMid
Send 3
Low
Send 4
Mixer Specific
Parameters
By pushing one of the „Mixer-Mode“ buttons you can leave the selected Channel-Strip-
Mode and assign the chosen paramenter to the Encoders. This makes it possible to edit the
selected parameter on the eight selected tracks. Additionally, you can change four more
parameters of the currently selected track in the third display. These four parameters will be
relevant to the selected „Mixer Mode“ Parameter. The specific assignment is decided upon by
the host software companies. Following you will find a brief explanation for each of the Para-
meter buttons:
Pan:
[Pan] assigns the Panorama position control to the Encoder. If a stereo
track is selected it controls the Balance. The push-button function of the
Encoder defaults the value to the center position.
Related parameters for the third display, in the case of Audio, Instrument,
Input or Bus-Tracks are: Output routing, Input routing, switching between
Mono-and Stereo tracks and also a Bypass function that applies to „sound
changing“ parameters described hereafter.
For MIDI tracks it is possible - analogous to the routing - to select a
MIDI Channel, MIDI Output and Bank Select number.
High, HiMid
LoMid, Low:
These buttons directly select up to four EQs. The Gain parameter is
assigned to the eight Encoders. The Encoders Push-button function will
either reset the Gain parameter to the default value of 0db, or set the EQ
to Bypass position.
The third display shows the parameters of the selected EQ. This includes:
the Bypass on/off state, the EQ characteristics (Shelving, Parametric, Cut,
etc.) and the setting of the filter frequency and quality.
Ins./Send:
This button changes the operation mode of the Send/Insert Select buttons.
This enables the direct selection of four Effect Sends, as well as four Inserts.
