41
Radijator Inženjering DOO, 36000 Kraljevo, Živojina Lazića Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150,
, e-mail: [email protected]
2. Description of the boiler
Boiler
BIOmax PRO
is developed as the company Radijator Inženjering DOO might offer to
the market the boiler, which by its mechanical and thermal properties is specially intended for
biomass as fuel
. If the user wants to use any other form of biomass, be sure to call the
service design and development Radijator Inženjering DOO or an authorized dealer,
because very often some forms of biomass require a separate, specific combustion
solutions
. When using these fuels means the automatic control of the main operating
parameters. In all stipulated examples of using biomass it requires a certain degree of dryness
of the fuels.
On the other hand, market demand is always turned towards higher fuel universality.
Wood pellets are produced from 100% cellulose. Wood residues are pressed under high
pressure into pellets of 6mm in diameter and 2-3 cm in length. The pellet should be adequately
stored in a dry place to ensure efficient combustion.
BIOmax PRO
boiler uses pellet that is
6mm in diameter, 5-30mm in length and with moisture content up to 10%, produced in
accordance with
EN 14962-2
standard.
BIOmax PRO 30
boiler has a nominal power of 31kW and minimal power of 10 kW.
BIOmax PRO 25
boiler has a nominal power of 26 kW and minimal power of 7 kW.
Figure 1.
Parts of the boiler; 1. Body of the boiler; 2. Combustion chamber; 3. Burner; 4. Feeder; 5.
Silos.
