53
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića
- Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: [email protected]
2. Description of BIO
lux
14 Boiler Heating Stove
BIO
lux
14 Boiler Heating Stove is designed for space heating in two-fold manner, ie. By means
of heating water for radiator heating within the Boiler Stove space and for heating of the
surrounding area by emitting heat through glass and heated surfaces, above all gas channels that
are positioned below the Boiler portion.
The energy that can be transferred into water at the emissions of gasses subject to the standard is
10,45 kW
and the emissions into the environment is
1,45 kW
.
Boiler Heating Stove consists of three assemblies whose basic components required to be
supplied in the standard version:
Boiler Stove portion together with the turbulance devices, the floor portion with the flue
gas outlets and the outer casing with doors contain glass-ceramic component.
Display, automation panel, motor reducer of pellet conveyor, sensor for water in the heat
exchanger, flue gas temperature sensor, temperature sensor for space in which the Boiler
Stove and other electrical equipment are situated.
Components of hydro installations which are mounted on the Boiler Heating Stove: circulating
pump, expansion vessel of 10 liters capacity, the pressure safety valve, air vent cock.
Wood pellets are produced from 100 % cellulose. Wood residues under high pressure are
compressed into pellets of 6 mm in diameter and in length of 2- 3cm. Pellets should be stored
correctly in a dry place to ensure efficient combustion. Boiler stoves use pellet of 6mm diameter,
of 5 -30mm length and humidity up to 10 % manufactured in accordance with EN 14962-2.
Figure 1. Cross-section of BIO
lux
Boiler Heating Stove