...CHARGING A LITHIUM POLYMER (LIPO) BATTERY CONTINUED
CARE AND MAINTENANCE...
6
2-3s LiPo Balance Charger
3. Press the Start button and hold until the ‘Status’ LED turns solid RED (Approximately 3
seconds) to start the charging cycle.
a. NOTE: If the LED begins to flash RED or if the charger is unresponsive to your
input, see the troubleshooting guide at the back of this manual.
4. Near the end of charge completion the LED will flash GREEN, indicating the charger has
entered Constant Voltage (CV) mode.
5. When the charge is complete, the LED will glow solid GREEN. The LED will glow solid
GREEN until the battery or AC power is disconnected.
a. NOTE: If the charger encounters an error throughout the start or charging
process, the ‘Status’ LED will flash RED/GREEN. See the trouble shooting guide at
the back of this manual for possible solutions.
6. Pressing the Start/Stop button at any time while charing will STOP the charge cycle.
WARNING: This charger contains an AC to DC converter which stores
electrical power for a short time after disconnection from the input source.
Always unplug the charger from both input and output before performing
any cleaning or maintenance to prevent electric shock. It is advisable to
wait at least 1 minute before starting your cleaning or maintenance.
Care:
• Always use clean, dry cloth or soft bristle brush to clean your equipment.
• Never use chemical cleansers to avoid damage to the sensitive electronics and plastics.
• Before every use, inspect the input and output power cords and plugs and discontinue
use if there are any signs of damage.
› NOTE: Continued use of a damaged battery or charger will void the warranty and
could cause personal injury and property damage.
Maintenance:
• Periodically use compressed air to blow out dust that has been trapped inside the
charger to help prevent excessive heat due to dust build up.
›
WARNING: Always wear eye protection when using com-
pressed air to clean your charger.
› NOTE: Ensure the charger is disconnected form input power and any battery
before performing any care or cleaning procedures.
