3
PHYSICAL FEATURES
GENERAL CHARGING PRECAUTIONS...
Simple • Capable •
Safe
1. Status LED
a. OFF: No input power detected.
b. FLASHING RED: Stand By, Power on but no battery connected.
c. SOLID RED: Charging.
d. FLASHING GREEN: Peak detection active
i. The charger has entered Constant Voltage (CV) mode, the battery is ap-
proximately 90% charged.
e. SOLID GREEN: Charge cycle complete.
f. FLASHING RED/GREEN: Error
i. Connection problem or damaged battery.
ii. Input power is out of operating limits.
2. Start/Stop Button
a. Pressing the button for 3 seconds will cause the charge cycle to start, indicated
by the LED glowing Solid RED.
b. Press to stop charging at any time while charging.
c. Press to clear an error.
3. LiPo Balance Charging Ports
a. 2s and 3s JST-XH balance connectors
b. Connect to the balance leads of your battery. Visit your local hobby dealer for
assistance if the plug on your battery and charger do not match.
c. WARNING: Never try to force connectors together.
4. AC input plug
a. For use with grounded receptacles (plugs) supplying 100-240V @50-60Hz AC
power.
5. Ventilation for cooling
a. Always keep clear and never stick anything into the charger through these or any
other holes in the case.
Although great for first time users, Radient RC products are indeed advanced electronics that
could result in injury if used improperly. Failure to use caution and common sense to operate
your product in a safe and responsible manner can result in damage to the product or other
properties. Therefore this product is not intended for use or maintenance by children without
direct adult supervision. Radient RC, and your local hobby dealer shall not be liable for any loss
or damages, whether direct, indirect, special, incidental, or consequential, arising from the use,
misuse, or abuse of this product or any product required to operate or maintain it. Following are
some general tips that will help increase the safe operation and enjoyment of your charger.
