7.
Record the current settings in this window, because we are going to want set them all back
to how they look now when we are done. If it is currently set for “Obtain an IP address
automatically” then this is all you have to remember, otherwise you will need each of the
above settings.
8.
After recording the current valid values, you will want to change them to something on the
192.168.1.0. Network. You can use the settings in this example, and they should work just
fine.
.
9.
After making the changes press OK and exit from all the open windows on your machine.
10.
Next you need to plug one end of the supplied Ethernet Crossover Cable into your PC, and
16
