Radiant RKA 25, Instruction Manual

Page: 7 / 56

GENERAL INFORMATION
TG05A095.A0306
3
1.2 Product conformity
RADIANT BRUCIATORI S.p.A. declare that all its products are manufactured to a high specification and in compliance with the
relevant standards.
All
RADIANT boilers are CE certified and possess technical and functional characteristics that comply with the following
standards:
UNI-CIG 7271 (April 1988)
UNI-CIG 9893 (December 1991)
UNI EN 297 for GAS-FIRED CENTRAL HEATING BOILERS TYPE B OF NOMINAL HEAT INPUT
≤ 70 kW
EN 483 for GAS-FIRED CENTRAL HEATING BOILERS TYPE C OF NOMINAL HEAT INPUT ≤ 70 kW
UNI EN 677 for GAS-FIRED CENTRAL HEATING BOILERS. SPECIFIC REQUIREMENTS FOR CONDENSING BOILERS
WITH NOMINAL HEAT INPUT
≤ 70 kW
The gas-fired boilers also comply with the following directives:
GAS APPLIANCES DIRECTIVE 90/396 CEE for CE compliance
LOW VOLTAGE DIRECTIVE 73/23 CEE
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 89/336 CEE
BOILER EFFICIENCY DIRECTIVE 92/42 CEE
The materials used such as copper, brass, stainless steel, etc. form a compact, homogeneous, highly functional unit that is easy
to install and simple to operate. In its simplicity, the wall-mounted appliance is equipped with all the appropriate accessories
required to make it a fully independent boiler capable of satisfying domestic hot water production and central heating needs. All
boilers are fully inspected and are accompanied by a quality certificate, signed by the inspector, and a guarantee certificate. This
manual must be kept in a safe place and must
accompany the boiler at all times.
RADIANT BRUCIATORI S.p.A. will not be held responsible for any misinterpretation of this manual resulting from the
inaccurate translation of same.
RADIANT BRUCIATORI S.p.A. will not be held responsible for the consequences in the case of non-observance of the
instructions contained in this manual or in the case where actions not specifically described herein are undertaken.