Radiant Communications DL221 Series, User Manual

Page: 8 / 8

- 8 -
TYPICAL SETTINGS FOR ETHERNET
SERVICE TYPES
Set Don’t Care
NWAY (Auto-Negotiation)
(FACTORY DEFAULT)
10 Mbps Half Duplex
10 Mbps Full Duplex
100 Mbps Half Duplex
100 Mbps Full Duplex
- 9 -
FIBER OPTIC PORT CONFIGURATION
NOTE:
Once the DIP switches have been set to the desired settings, the
configuration must be locked into the unit. This is accomplished
using DIP switch #6. After each configuration change, move S6 to
the “down” position, leave it there for at least one second, and then
move S6 to the “up” position. This locks the configuration into the
Series DL221/DL221A transceiver. When the “reset” DIP switch
(#6) is down, the system will not operate. Be sure to return S6 to
the “up” position.