Bantam Plus Getting Started Guide v6
24
Radian Research, Inc.
4.
Pulse Detection Indicator:
LED will flash green when a meter pulse is detected.
A visible pulse sensor detection LED is duplicated within the integrated sensor
head.
5.
Volume Control:
The Volume Control Keyboard is used to control the volume
of the audible pulse the unit generates to echo pulses detected when conducting a
meter test. The keys on the left and right lower and raise the volume respectively.
Pressing the mute key will light the blue LED within the key indicating that the
unit is muted.
6.
Ports 1, 2 & 3:
Ports 1 thru 3 are each suited to a particular type of optics. The
connector "port 1" is reserved for an Optocom (RB-Optocom) cable. Optocom
Optics allows the operator to not only detect pulses from solid state meters, but
also allows the operator to program the meter without changing the optical head
(external PC required). This connector may also be used for custom pickups as
required. Contact Radian for any special needs that may not be met by the
standard set of pickups.
„Port 2‟ is a BNC connector reserved for a wide variety of optional optics
accessories, including clamp-on and suction-cup based reflect solid state optics.
During normal testing when Input 3 is not the source this connector also outputs
a test pulse for calibration purposes.
„Port 3‟ is a BNC connector reserved for an optional click-switch adapter that is
used when other optics aren't suitable. The BNC connector is also used when
conducting a standards compare test.
The red LED on the integrated Sensor Pro
TM
optics sensor provides a visual
indication that the unit has detected a pulse.
An external sensor connected to Port 2 will
disable the Sensor Pro
TM
optics on board.
N
OTE
Inter
nal
fans
may
not
activ
ate
whe
n
swit
chin
g
line
volt
age
on.
The
Summary of Contents for Bantam Plus RB-2 Series
Page 1: ......
