MI CT 05 00001
Issue
April 22, 10
Page
2/2
STEP 3:
•
Once cooled, remove the solder barrel gauge.
•
Cut the dielectric flush to clamp braid sleeve.
•
Slide the insulator onto the cable center conductor.
•
Slide the center contact onto the cable center conductor against insulator.
•
Fit the cable assembly onto the soldering jig & the positionner.
•
Tighten cable & solder the center contact.
-
Soldering Jig : R282 740 000.
-
Positionner : R282 744 220.
STEP 4:
•
Screw sub-assembly into the outer contact.
(Recommended coupling torque 17.7 inch.lb [2 N.m])
Insulator
Insulator
Outer contact
Tightening
Solder detail
Positioner
Soldering jig
Center contact
