Radialight WINDY, Installation And Operating Manual

Page: 21 / 40

21
The product can be used choosing between 4 different operating modes:
- ANTI-FREEZE
- PROGRAMMED
- AUTOMATIC
- BASIC
Anti-freeze mode
The thermostat is set to keep 7 ± 3 ° C. The function is activated manually or automatically when no presence in the
room is detected for at least 36 hours. In this case, as soon as a presence is detected again, the product will automa-
tically set the automatic mode.
Programmed mode
The product can be programmed by selecting, for each day of the week, which of the 5 preset profiles you want to use.
During all the operating time in programmed mode, the presence sensor is deactivated so that the product can correctly
follow the temperature profile set by the user.
In Programmed mode there is also a special function - which can be activated at the user's choice - allowing the detec-
tion of the eventual opening of a window and switching to the Anti-freeze mode to minimize energy waste.
Automatic Mode
The product is set to work at a comfort temperature whenever someone is detected in the room. Should no one be
detected in the room for at least TEN minutes, the heater will automatically set the Eco mode (3,5°C less than the set
Comfort temperature). Should no one be detected in the room for more than 36 hours, the heater will automatically set
the Anti-freeze mode (7°C). In case someone should be detected again for at least 2 minutes, the product will automa-
tically increase the temperature to the comfort level.
In automatic mode is also available a special feature, which is activated at user’s choice, which allows to detect the
possible opening of a window and to switch to the Anti-freeze mode to minimize energy waste.
Basic Mode
The product works in Comfort mode. The presence detection is disabled and doesn't affect the set temperature as in
Automatic mode.
In Automatic mode is also available a special feature, which is activated at user’s choice, which allows to detect the
possible opening of a window and to switch to Anti-freeze mode to minimize energy waste.
6. u
sing the Fan heater
MAIN ON/OFF SWITCH
(placed on the left side of the product)
The power supply of the product is controlled by an electromechanical ON/OFF switch. Switching off the fan heater will
cut off the power to the electronic board causing - after 30 minutes of power supply absence - the loss of every stored
information. We recommend to use this switch only when you are not using the product for long periods. Instead, it is
possible to use the on/stand-by key for any short-term interruption, so that no stored setting will get lost.
At first use of the product or in case of over 30 minutes power loss, when the product turns on the display shows 00:00
and begins counting the time starting from this value.
Should no adjustment be made within 15min after power up, the product will automatically switch to Anti-
freeze mode with the lighting up of the corresponding LED light.
ON/OFF