Radialight AER Pro N, Operating Instructions Manual

Page: 11 / 16

11
c
ontol Panel and accessories
• On the front of the product there are 6 buttons and a multifunction display to control all the functions (figure 1).
• The 6 buttons on the product (figure 1) and also on the remote control (figure 2) have the following functions:
Product Remote Function
ON/OFF Turns on the product or sets it to standby.
COOL Activates the cooling function.
VENT Activates the ventilation function.
SPEED Sets the fan speed.
SWING Activates the swing for better air diffusion.
TIMER Starts timed operation.
s
witching on and using the functions
WARNING : The air outlet grill must be opened manually before turning on the product.
SWITCHING ON AND OFF
• After inserting the plug into the socket, the product is in Stand-by mode. The relative indicator lights up and a
confirmation "beep" is emitted.
Note: The indicator light comes on regardless of whether the cooler is running or not.
• From Stand-by status, press the ON/OFF button (or the button A in figure 2 on the remote control) to switch on
the product. The appliance starts operating in the mode in use at the time of the previous shutdown. If you are
using it for the first time, the product starts up in low speed cooling mode.
• By pressing the ON/OFF button (or the button A in figure 2 on the remote control) during operation the product
returns to Stand-by mode. If at the time of switching off the product is in cooling mode, ventilation continues for
10 seconds at minimum speed before going into Stand-by.
FUNCTIONS
• The product has the following functions:
- Ventilation;
- Cooling;
- Speed control;
- Swinging;
- Timed operation;
- Protection for lack of water.
• VENTILATION
Press the VENT button (or the D button in figure 2 on the remote control) to activate the ventilation mode: the
respective icon lights up. The cooling system is deactivated.