Radial Engineering Ltd.
StageDirect™ Active Direct Box
True to the Music
®
uSInG And TESTInG
Slowly bring up the level on the PA system. It is good practice to always
test at a low volume to ensure proper connections have been made and
all devices in the signal chain are working. This way, should a device not
be turned on or a connector not fully pushed in, it will not create a loud
transient ‘pop’ in the PA which in turn could blow a tweeter or annoy your
audience. If you are using a stage amp, slowly turn up the volume and
test it as well.
THE -10dB PAd
If you hear distortion, check to make sure the trim control on the PA
is set correctly. If the problem persists, your instrument signal is likely
overloading the StageDirect input. This can happen when connecting
high-output electronic instruments like keyboards and bass guitars with
active electronics. To eliminate distortion, engage the StageDirect’s PAD
using the switch on the top panel. When set to the -10dB position, this
switch reduces the sensitivity of both instrument inputs.
THE TunEr ouTPuT
The StageDirect is equipped with a separate output for an electronic
tuner. The tuner output is not affected by the MUTE footswitch and is
always on to let you quickly adjust your tuning on the fl y or in silence
when the MUTE footswitch is engaged. The connection is made using a
standard hi-Z ¼” instrument cable.
4
Connecting a tuner.
