Radial Engineering Ltd.
Shotgun™ User Guide
2
FEATURES
1.
POWER:
Standard 9V connection for standard Boss-type
power adaptor or DC brick. PSU is not included.
2.
OUT-1 DIRECT:
Used to connect to your first amp.
Provides the Shotgun with a ground reference for safety.
3.
OUT-2, 3 & 4:
Transformer isolated outputs to eliminate
ground loops and help reduce hum and buzz.
4.
IN-1 MONO:
When used alone, sets the Shotgun to the
1x4 mono mode with input-1 driving all four outputs.
5.
IN-2 STEREO:
When used, changes the circuit from 1x4
mono to 2x2 stereo to allow stereo sources such as a
chorus to drive 1 or 2 sets of amps.
6.
POWER LED:
Lets you know the Shotgun power supply
is properly connected.
7.
180º:
On outputs 2, 3 & 4 toggles the polarity of the
outputs to ensure all your amps play in relative phase.
8.
LIFT:
On outputs 2, 3 & 4 lifts the audio ground to help
prevent hum and buzz caused by ground loops.
9.
STEEL CASE:
Heavy 16-gauge steel case provides
shielding from power supplies and keeps the internal
electronics safe from abuse.
5
6
4
3
8
9
7
2
1
+
-
The Shotgun requires a 9 volt power
supply with a negative center.
Summary of Contents for SHOTGUN
Page 2: ......
