3
INPUT PANEL
1. XLR INPUT
for balanced,
low-impedance, +4dB line-level
signals.
2. Ground lift
disconnects the
signal ground to eliminate buzz
and hum caused by ground loops.
3. Secondary Ground Lift
used
for instances where two separate
devices are connected to the
outputs.
OUTPUT PANEL
4. Output Level
provides signal
attenuation to prevent clipping.
5. 3.5mm TRS
output connection
for stereo -10dB devices such as
portable recording units.
6. RCA Phono
left and right stereo
outputs for -10dB consumer audio
electronics.
7. ¼" TS
left and right stereo
outputs for high-impedance audio
electronics.
CONSTRUCTION
8.
Bookend design
14 gauge steel
outer shell creates protective zone
around connectors and switches.
9.
I-beam enclosure
eliminates
stress that could torque the PC
board and cause solder joint failure.
10. PCB mounted
switches are
high-cycle rated for long life.
11.
Jensen
(J•ISO) and
Radial
(Pro-ISO) transformers offer
outstanding audio performance.
12.
Military-grade
double-sided
PCB with plated through-holes is
bolted to welded steel standoffs.
13. Full-bottom no-slip pad
This
provides electrical isolation and
plenty of "stay-put" friction.
1
J•ISO / Pro-ISO User Guide
Radial Engineering Ltd.
11
12
13
9
10
8
7
6
5
4
2
