PREPARATION FOR OPERATION
Fitting power elevents
1. Open the battery compartment lid.
2. Insert two batteries ("AAA")
3. Close the battery compartment.
, ,
functions can be changed depending on application.
Flashlight
Key
Mini-USB
Display
Key
Key
Result
The first measurement result will appear
on display after about 10 seconds.
Switching off
Press and hold
for a few seconds.
Switching on
Press
.
DISPLAY LAYOUT
Icons
1- 5, 11, 12
are displayed when the device is turned on.
1.
Audible alarm
2.
Measuring Cycle in progress
3.
Vibration On/Off
4.
Backlighting
5.
Bluetooth On / Off
6.
Atmospheric pressure
7.
Key function
8.
Key function
9.
Measurement result
10.
Air temperature
11.
Key function
12.
Date: Day - Month - Year
13.
Time
14.
Background Radiation
15.
Alarm threshold
16.
Power battery charge level
- high
•
•
•
- low (battery to be
replaced).
17.
Unit of measurement:
micro Sievert per hour
18.
Indicates that a quantum was
detected,when flashing.
19.
Number of measurement cycles
performed
DEVICE OPERATION
Measurement
Measurements begin when the device is turned on.
TIP: Normally, we recommend keeping the Background Mode off, unless you are
scanning a specific object in a new environment. This mode takes 5 consec
-
utive readings to establish base-line background radiation in your immediate
area, and then shows any readings higher than the established baseline.
а
- excess over (b)
b
- baseline background radiation
Result
1
16
17
18
19
8
9 10
11
12
13
14
15
2
3
4
5
6
7
Quick Start Guide
This device is intended to measure the background ionizing radiation of the
environment as well as products and materials.
APPEARANCE
Battery compartment
Battery
compartment lid
a
b
Measurement with Background Mode
When making measurements with Background Mode ON, two results are
displayed simultaneously:
