- Page 15 -
5
Using the Model 8200
™
ACU
5.1
Power-up the ACU
Warning:
the antenna must have working hardware limit switches properly installed to
avoid damage and, potentially, injury when operating the connected ACU.
1.
Verify that the ACU is connected to power.
2.
Turn on the ACU via the power switch on its rear panel. The touchscreen will illuminate
when it is ready.
5.2
Hide, quit or power-down the ACU
Use the Setup > About tab to…
•
Desktop
—
view the desktop without affecting current ACU operations.
•
Quit
—
stop the ACU and exit to the system desktop.
•
Shut Down
—
stop and power-down the ACU.
