=============================================================================
Threat Display
=============================================================================
If the detector detects more than one signal, the additional received signals will also be displayed. The display will
show the three strongest signals with priority Ka>K>X.
=============================================================================
Brightness Mode
=============================================================================
Brightness of the display is selectable as below.
1. BRIGHT
Full brightness
2. Dim
Reduced brightness
3. Dimmer
Further reduced brightness
4. Dark :
The display turns off (Completely dark). The display turns on (Bright) only when a button is pressed.
5. Smart Dark: The display turns off (Completely dark). The display turns on (Bright) when a button is pressed or an
alert is received.
=============================================================================
DB Update
=============================================================================
Connect Unit to PC by USB cable and use DB Update Manager (PC Program) to download POI DB Points (Store up
to 60,000 points). The DB Update Manager can be found at the Update section of the Radenso Homepage
http://radenso.com
=============================================================================
Firmware Update
=============================================================================
Connect Unit to PC by USB cable and use Firmware Update Manager (PC Program) to download a new firmware if
available. The Firmware Update Manager can be found at the Update section of the Radenso Homepage
http://radenso.com