PAGE 8
software updates
Updating the AL Priority.
Take the included USB flash drive and
plug it back into your computer. Delete
any existing files on it so you are start-
ing with a blank flash drive.
Point your web browser to www.alpup-
date.com and click on “I agree” to accept
the Terms of Use.
You will see the option “Configure” in
large text on the left side of the page.
Click on the blue “Enter” button to enter
the configuration file setup.
Select “North America” under the region
drop-down. This will take you to a page
with several options.
By default, the AL Priority system is
shipped in parking sensor only mode.
If
you wish to enable laser defense, you
must choose the “PDC & LID” option.
Choosing “PDC & LID” will present sever-
al more options below.
Leave every-
thing default except for “LID” time.
This must be set to “Unlimited.”
Click “Save & download” to download
your configuration file. Move this file to
the USB flash drive.
Point a new browser window back to
www.alpupdate.com. This time, click on
the blue “Enter” button under the “Firm-
ware upgrade” text.
Enter the serial number of your ALP
control unit (found on a sticker on the
back of the unit) enter the prompt, and
press “OK.”
You will be prompted to answer a sim-
ple math problem as proof that you are
human and not a bot. Solve the problem
and hit “Press to Download.”
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
A firmware file will be downloaded to
your computer. Move this file onto the
USB flash drive. The flash drive should
now have two files on it; the config file
as well as the firmware file.
Remove the flash drive from your com-
puter and plug it into the AL Priority
CPU unit’s USB port. Make sure the RC
M and ALP are both powered off when
you plug it in.
Turn on the RC M system and wait sever-
al seconds. The RC M will automatically
recognize that the ALP has the firmware
update flash drive plugged in, and the
CPU will begin updating.
Once the ALP has finished updating, the
RC M display will give you a message
indicating that the process has finished.
Remove the flash drive from the ALP
control unit and manually power off the
RC M system.
Power the RC M system back on and the
process is complete.
11.
12.
13.
14.
15.
16.