21
EN
9.6 Final installation of the
DuoFern Window/Door Contact
i
1.
Mark the installation positions of the sensor part and mag-
net, e.g. with a pencil.
2.
Detach the fixed sensor part and magnet.
3.
Remove the round adhesive pads and clean the adhesive
points thoroughly with the cleaning cloth provided.
4.
Apply the double-sided adhesive strips.
5.
Re-affix the sensor part and magnet precisely to the previ-
ously marked points with light pressure.
i
Repeat the teach-in process if necessary (see
page 19), if the respective states are no longer
detected properly after the final installation.
Summary of Contents for DuoFern
Page 31: ...31 EN...
