19
EN
i
9.4 Teaching in the window or door positions
1.
Open the window or door.
2.
Activate the desired mode:
S
3 sec. = Window mode >
LED flashes green
6 sec. = Door mode >
LED flashes blue
9 sec. = Inverted door mode > LED flashes red
2 x
Then two short acoustic signals
confirm that the first position is stored.
3.a
Close the window or door.
2 x
After approx. 3 seconds, two short
acoustic signals confirm that this
position is stored.
The following point 3.b is skipped in door mode!
Additionally in window mode (green LED)
3.b
Tilt the window.
2 x
After approx. 3 seconds, two short
acoustic signals confirm that this
position is stored.
4.
Open the window or door again.
2 seconds
A long acoustic signal confirms the
successful teach-in process and the
LED goes off.
The teach-in process is completed at this point.
Summary of Contents for DuoFern
Page 31: ...31 EN...
