54
EN
17.2 Logging off DuoFern Devices
1.
Switch the desired DuoFern device to the log-off mode
(please refer to the relevant instruction manual).
2.
+
MANU
1 sec.
Enable the log-off mode of the DuoFern
Motion Detector 9484.
Simultaneously press and hold the
buttons for 1 second.
120 sec.
The log-off mode remains active for
approx.120 seconds.
3.
During the logging off process,
the middle indicator light flashes red.
4.
After successful logging off, the middle
indicator light lights up for approx. 4
seconds and the connected appliance is
briefly switched on or off.
5.
Log off the next DuoFern device.
For this, repeat points 1 to 2 or terminate the log-off.
Pay attention to the middle indicator light
The middle indicator light lights up red if the registration process
fails, for example if:
◆
An attempt was made to log-off a DuoFern device that is
not logged-on.
i
Summary of Contents for DuoFern 9484
Page 63: ...63 EN ...