47
EN
15. Setting the Brightness Set Limit
With the brightness set limit, you can determine with which
level of brightness the motion detector is enabled.
There are five different settings.
1.
4 sec.
Press and hold the button for
approx. 4 seconds.
2.
The brightness set limit is displayed after
approx. 4 seconds (example).
Display the set brightness set limit
Observe the following whilst setting the indicator lights:
= 5 lux (low level of brightness)
= 10 lux
= 50 lux
= 200 lux
= 700 lux (high level of brightness) *
= Brightness sensor disabled
i
* Factory setting
Summary of Contents for DuoFern 9484
Page 63: ...63 EN ...