RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning Download Page 38

Page: 38 / 128

Prior to the electrical connection, check that the voltage / frequen-
cy on the type plate corresponds to that of the local mains supply.

Read the specifications relating to the electrical

connection detailed in the instruction manual of the
electrical appliance used.

8. Safety instructions for the electrical connection

DANGER!

There is a risk of fatal electric shock when touching
electrical components.

◆

All connection and installation work must only
be carried out in a de-energised state.

◆

Disconnect all phases of the mains power cable
and secure it to prevent any reconnection.

◆

Check that the system is de-energised.

WARNING!

There is a risk of fatal injury caused by short circuiting when
the DuoFern Room Thermostat 9485 is overloaded.

The maximum switching capacity must not be exceeded, for
this, please observe the details in the technical specifications,
see page 30.

Summary of Contents for 9485

































































































































Search results

Summary of Contents for 9485

Reviews:

Related manuals for 9485

Brands by name

Popular brands

RADEMACHER 9485, Instruction Manual For The Electrical Connection And For Commissioning

Search results

Summary of Contents for 9485

Reviews:

Related manuals for 9485

Brands by name

Popular brands