manualshive.com logo in svg

RADEMACHER 3500 12 62, Instruction Manual

Share
Download
RADEMACHER 3500 12 62 Instruction Manual Download Page 32

32

EN

10.  Manual mode

i

Key to the previous table

#   If the last intermediate state has been reached, then the DuoFern 

1-10V Controller stops here.  No intermediate state is saved upon 
connecting the mains power supply.

*  The current brightness of the lamp is saved as the intermediate state.

More information about the functionality

 

◆

The dimming time for manual commands can be config-
ured via the running time feature.

 

◆

Use the light mode if you want to operate the DuoFern 
1-10V Controller together with roller shutters.

10.1  Operation with an external button

Brief press

 

=  switches ON/OFF, does not stop upon 

 

  reaching the intermediate state

Press and hold

 

= 

dims alternately (on to 100 % / 

 

  off to 0 %), the new dimmed value is 

 

  saved as the intermediate value.

10.2  Jog mode

Jog mode is available to conveniently configure the output. The 
output is increased or reduced by 10% in each case. 
The jog mode must be activated on the respective controller (e.g. 
DuoFern Manual Transmitter) so that the corresponding control 
commands are transmitted.

i

i

Summary of Contents for 3500 12 62





































Reviews:

No comments

Brands by name

Popular brands

Load more brands