55
55
EN
1.
2.
3 x
+
. . .
. . .
. . .
. . .
approx.
10 s
or
or
i
Controlling blinds and dimmers in jog mode
Function:
◆
If the UP or DOWN button is pressed
briefly
in jog mode, a
jog command
is sent. This enables the easy adjustment of Venetian
blind slats as the motor only runs briefly.
◆
When used in combination with dimmers, jog mode increases or decreases the brightness by 10%.
◆
If you
press and hold
the UP or DOWN button (>1/2 second), the normal UP and DOWN signals are sent. Jog mode can be
switched on and off separately for each group, where applicable.
Switching jog mode on and off
Select the desired group with the corresponding
group button.
Press and hold the STOP button for approx. 10
seconds.
Observe the button LED and status LED:
The LED for the selected group button flashes three times
and the status LED lights up:
Green
(Jog mode has been switched on).
Red
(Jog mode has been switched off).
Actuators that do not support jog mode ignore jog com-
mands.
Summary of Contents for 3248 03 66
Page 31: ...31 31 DE i ...
Page 63: ...63 63 EN i ...
