151
GB
C. Retraction Delay
i
Adjust the value with
(higher) and
(lower). Then press
SET
to proceed to the
setting of the next parameter.
D. Indoor Temperature Limit
After setting the retraction delay, now enter the indoor temperature below which the
extension of the sunshade is to be barred.
i
Using the indoor temperature limit, you can use the heat of the sun to achieve the
desired room temperature (e.g. in the winter - energy-saving function). Only when the
value is exceeded does the sunshade extend when the sun comes out. The indoor
temperature limit is active only in Automatic mode of the controller. Manual operation
of the sunshade is still possible.
The default setting for the indoor temperature limit is 18° C.
Adjust the value with
(higher) and (lower) or select
to deactivate the
indoor temperature limit. Then press
SET
to proceed to the setting of the next parameter.
Summary of Contents for 2696
Page 231: ...231 ...
