40
Buttons
Indication in the display
Registration with the Fernotron receiver
1.
Press SET button on the
receiver
See operating instructions for the
receiver concerned.
SET
2.
M
3.
4.
on the receiver
/
If you wish to register the Programming Centre with a Fernotron
receiver, for example when retrofitting a new receiver in your
existing Fernotron system, you have the following options:
1.
Registering with a receiver using the SET button, see below.
2.
Registering with a Fernotron radio-controlled tubular motor
with radio code, see page 42 and expert mode, page 48.
If you wish to re-register the Programming Centre with a previously
registered receiver, then any former group allocations in the
receiver will be deleted.
Registration with a receiver using the SET button
ADVICE
/
OK
Call up the menu
Select and open the data
transmission ( )
Select group and/or receiver
