background image

User Manual 2012

9

LIST OF SAFETY CHECKS

The initial set up of the chair and safety checks should be made to correspond to your body and
your  preferences  by  a  suitable  qualified  professional.  After  that,  remember  to  perform  the
following maintenance procedures regularly.

13

REGULAR MAINTENANCE

Your  wheelchair  needs  proper  maintenance  to  continue  operating  safely  and  easily.  Regular
maintenance  will  prolong  the  life  and  increase  the  comfort  of  your  wheelchair.  It  will  also  help
maintain it in a safe condition.

PERIODIC MAINTENANCE

ITEM MAINTENANCE OPERATION
General

The wheelchair folds up and unfolds easily. The wheelchair rolls straight (no resistance or veer).

Parking Brakes

Parking Brakes must remain clear of the tyre when they are not applied. If linkages or fasteners
appear loose or worn, contact your supplying dealer or Wheelchair Service Centre for assistance.

Cross-braces

Check that they are not worn or bent and that the central pivot bolt is nor worn or damaged.

Armrests

Check that all fasteners are in place.
Check that they are easy to remove & refit.
Check that the armrest locating pins function correctly.
Check that both seat and seat-back upholstery are in good condition.

Rear drive wheels

Check tightness of axle nut and sealed bearings.
Check rear wheels for excessive buckling.
Check tyres for uneven wear or excessive wear.

Spokes

Check for bent, broken or slack spokes.

Front castors

Check the axle function for free wheel.
Adjust the bearing if the wheel wobbles or grips.
Check that all castor fork bearing are tight.

Inflatable tyres

If the wheelchair has inflatable tyres (not recommended), check that they are filled to the pressure
specified on the sidewall. Check for excessive tread pattern wear and damage to the tyres.

Cleaning

In  domestic  applications,  clean  and  disinfect  all  accessible  surfaces  daily  using  one  of  the
commercially  available  household  disinfectants  always  follow  their  guidelines  for  use. For
institutional  applications,  follow  the  instructions  as  recommended  by  your  Infection  Control
Adviser.

Seat and backs

Check seat and backs for any signs of wear and/or tearing. If they are damaged in any way your
safety will be compromised.

TROUBLESHOOTING AND REPAIR

Summary of Contents for TINA FHD1000




























Reviews: