Accu-Gold Touch
User Guide
WiFi Mode - Using Accu-Gold 2 software
Power on the control unit and select "Wifi Mode" on the start screen then click "Start Wi-Fi"
The Display on the control unit will go blank, when the Blue LED blinks rapidly it is ready to connect. Launch Accu-Gold 2
and select "Connect via Wi-Fi" on the start screen. When the software displays "Ready" you can begin to measure.
If the connection fails, go to the windows connection manager
and select TouchXX-XXXX and click connect.
If a PIN is requested click the underlined text below "Connect
using a security key" and enter 12345678 for the password.
Once connected the status will be "No Internet, Secured".
You can now click the "Start" button on the measurement
screen and standby for initialization.
When finished, turn off the unit. There might be a delay before
the LED goes out.
17
